User Reviews Overview
About JobBOSS²
Designed specifically for job shops and make-to-order manufacturers, JobBOSS² is a trusted, cloud-based system that provides the flexibility manufacturers need to maximize productivity and profits, while scaling effectively....
Learn moreAll JobBOSS² Reviews Apply filters
Browse JobBOSS² Reviews
All JobBOSS² Reviews Apply filters
- Industry: Chemicals
- Company size: 51–200 Employees
- Used Daily for 2+ years
-
Review Source
JobBOSS as an ERP
Overall we like the product and have good results with the support teams.
Pros
JobBOSS as a standalone is good, with some nice Crystal Reports added on. What makes it great is that there are quite a few add-ons available (for Quality, CRM, etc.) , plus it it stores all of its data in a SQL format that works well with Microsoft products.
Cons
I work mostly in the Finance/Accounting side of the business. There are some basic things that could be added in the next version upgrades.
Response from ECI Software Solutions
Hi John, Thank you for your recent review of JobBOSS! We appreciate your feedback in making our solutions better. Would you mind sharing the basic things you referred to that could be added to our next version upgrades? We would love the opportunity to pass this along to our software dev team. Thanks again and we appreciate you as a customer!
- The ECi Marketing Team
- Industry: Machinery
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
Steve Cate
We can quote jobs so fast with E2 it has become the way we control the pace of our business. If we want to be busier we submit a quote within hours of the RFQ. If we are too busy we take longer to submit quotes. It also helps a lot with scheduling but scheduling is the most difficult function to use.
Pros
Ease of use and good tech support. Very similar to quickbooks
Cons
When allocating stock to jobs, unless it was purchased specifically for that job, it is a bit cumbersome so we had a custom report written to allow the tag number of the inventory to be scanned.
Reasons for Choosing JobBOSS²
JobBOss tech support was terrible and they were very expensive to add data collection modules.Reasons for Switching to JobBOSS²
Tech support's demo of the product- Industry: Electrical/Electronic Manufacturing
- Company size: 51–200 Employees
- Used Daily for 1-5 months
-
Review Source
Archaic & Tedious
Archaic and Tedious is exactly how I would describe Exact JobBoss. There are significant limitations in the software to consider up front. Part numbers are limited to 30 Characters. Drawing numbers are limited to 16 characters. General Description field is limited to 30 characters. Their answer to this is to provide an extended description dialog box. But you can not see the value of extended description in any sort of list view, therefore you can not see the complete description of your materials or parts anyplace until you generate quote document, or purchase order document, or a report. The general Description field will clip your description. It will let you enter more than 30 characters. But if you save and exit, then open the same quote it will have clipped the description to 30 characters. The UI is not user-friendly despite other reviews. I seriously doubt they have conducted usability and ergonomics studies with actual customers. It is very easy to get off track and be very disorganized with materials. Where it should have a good predefined material structure. The reporting side is very limited unless you are familiar with programming Crystal reports yourself. If you are building a product structure where multiple components use the same material, there is no way to add the same material to multiple components at once. You can copy material from one component to another, however, you cannot copy just a single material. For example, the component that I am copying from may have 5 materials in it. I have to copy all 5 materials into the target component then delete the materials I don't want in it. Same way with copying routings. A tech support rep argued this with me via email. To convince him I was correct and it was not possible I had to take a video of my screen attempting to copy one material and send that to him. Only then did he come off his position that it was possible. I can not see both the routings of a component and the materials of a component at the same time. They are two separate view windows you have to click back and forth in. Likewise, you cannot see the materials in multiple components at once. You have to click back and forth between the components you are interested in. If they rearranged their UI you could do some of these things, because there is plenty of room on your average size monitor screen. I have a 24" monitor and at a comfortable resolution, JobBoss is really only utilizing about 50% of my display space with actual pertinent information and controls. It's very easy to accidentally delete things and there are not many places where you can Undo, so if you accidentally delete something you are SOL. There is no way to add additional custom properties to a component. For example, I can not have Customer Part # and Our Part#. There are unforeseen nuances as well with formatting as well. If you enter a value in Vendor Reference field or Detail Number, then it overwrites the space for Extended Description on our Purchase Orders with Vendor Reference or Detail Number instead. You can not delete a material that has been used in a job. Unfortunately, we have a terrible material database with poorly named materials. We would like to replace the badly named materials with new materials that make more sense. But there is no good way to do this. Once a material has been used, closed, or scheduled it can not be deleted. It can only be inactivated. But what I want to do is replace it completely. Now they will say that they have a replace functionality, but it is really a rename functionality. But you can only rename one material at a time. So it's not really a replace function. Lastly, if you have limited seats you can set a user sign out after a period of time. However, I have found that if you walk away and have not saved your quote or job and it auto signs you out, it DOES NOT always save it for you. So you may lose work that you have done since last save.
Pros
It has quoting, materials, costing, and scheduling, and job status capabilities.
Cons
Sadly the UI is severely lacking. And it seems not much thought is given to usability and efficiency.
Top JobBOSS² Alternatives
- Industry: Oil & Energy
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
Gem-Trim of Houma, LLC (Manufacturer of Control Valve Parts)
Our experience has been excellent.
Pros
Gem-Trim is a small manufacturing company of control valve parts. The E2 Shop System fit our company perfectly with the three modules we needed (Manufacturing, Financial, Quality). E2 is not a multi layered system like some of the other systems we looked at. Gem-Trim uses all three modules to a high degree and the three modules compliment each other and provides management to a vast amount of information. The E2 System is an extremely user friendly product but still gives a small company the big company profile.
Cons
There were some minor obstacles in the program we had to overcome and adjust to, but the support from the E2 staff was a tremendous help and assisted us through those situations.
- Industry: Aviation & Aerospace
- Company size: 51–200 Employees
- Used Daily for 2+ years
-
Review Source
E2
Overall experience with the personal at Shoptech. From the support to team to the sales team. All are knowledgeable.
Pros
The versatility, working with the custom development team and being able to get features that aren't out of the box. From the end users perspective it's easy to use.
Cons
I have no complaints at this time. Very pleased with the product.
- Industry: Mining & Metals
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
Exact JobBOSS review
Good Service generally and helpful on custom apps. We have done a bunch of them!
Pros
Good first level entry product. Lots of options for expansion. Priced well. works well for most of what we do
Cons
Could be easier to use. Search in fields could search the whole field instead of just in order. Need ability to reschedule batches of jobs or ops. Looking in the future to need better paperless abilities for the floor. This would be drawings, capacity dashboards. Also as things become more connected we are going to need ability to integrate to nesting
Reasons for Switching to JobBOSS²
functionality & price. Bang for the buck. Overall we have been happy with it. But we have had to build a fair amount of custom apps.- Industry: Mechanical or Industrial Engineering
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
Good software
Overall this is the best application for what we need. The customer service is top notch. The custom development team is good.
Pros
I like the fact the you can route, have job costing, accounting, etc all in one area. For this type of application, this is the best software to choose from. Shoptech continues to make improvements and listens to the customers on where to improve.
Cons
The quality module needs improved as well as the scheduling. The repository in unusable.
- Industry: Mechanical or Industrial Engineering
- Company size: 11–50 Employees
- Used Daily for 1+ year
-
Review Source
Great Option for Small Manufacturing Business
Pros
E2 Shop is very user friendly! It is easy to navigate and easy to understand.
E2 Shop has the best customer service we have experienced and has a wonderful online discussion board and help documents to help along the way.
Cons
We have experienced a good amount of "glitches" and software "hang-ups" that require a system repair which we were advised to do every 2 weeks. (All have proven to be software related).
- Industry: Mechanical or Industrial Engineering
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
Used to use E2
Customer support and product was good. We aren’t a machine shop and are a travel service company. E2 wasn’t offering a Mobil App at the time we needed it. That is why we moved to another software to track all employees time and expenses.
Pros
It was great at linking in-house employee hours jobs.
Cons
It was not easy for employees to change their time during the day/week. Managers had to edit it.
- Industry: Public Safety
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
E2 Review
It did what we needed it to do. Monitor Inventory, Produce Quotes , Acknowledgements, Invoicing. Keep a History. It has been an improvement over using spreadsheets like we were doing.
Pros
It did what we needed it to do. Monitor Inventory, Produce Quotes , Acknowledgements, Invoicing. Keep a History.
Cons
Need a basic scheduling of orders interface without buying another package.
Alternatives Considered
DELMIAworksReasons for Switching to JobBOSS²
It was able to do what we need it to do and Job Shop did not.- Industry: Semiconductors
- Company size: 11–50 Employees
- Used Daily for 1+ year
-
Review Source
ECI Jobbos Software is Non Intuitive and non flexible, and the Trap you into a year contract
The software is probably the most poorly developed and an un-useful software that I have ever experienced. The product was complete and absolute garbage. I should have fire the employee who spec'd it in.
The implementation in trying to get the software to do what we wanted was a nightmare, so after 9 months of trying to "tweak" the system to do what we wanted, and another 2 months of just trying to live with what we bought, I decided to cut our losses. And then less than 10 days prior subscribing to the software for a year, I received an email telling me that my license key would be expiring, from which I was able to deduce and then confrim after contacting customer service, that we were on an annual contract.
And then without any call back number or anything I received an email telling me that I was required to cancel the contract 30 days prior to the "renewal", and therefore I could not cancel the annual renewal. (note I was paying monthly and frankly had no idea that this was an annual contract) Nonetheless I did contact them prior to the renewal once I figured out what they were pulling. For clarification, the email I received 10 days prior to the "renewal" did not reference "Renewal" or annual contract and it was sent to me 10 days prior so according the 30 day notice requirement, it was already to late as it were.
Pros
Absolutely Nothing. There was nothing that we liked about the software
Cons
The Description field for parts is limited to 30 characters. The database does not include a vendor/manufacturing part number field as a standard filed and you have to do workaround to get it to show on your purchase order. The software is completely non-intuitive, is extremely cumbersome and non-flexible and then they nickel and dime for every single change. The implementation phase was a total joke where after 9 months it still was not doing what we need it to do.. And then they to not make it clear that it is an annual subscription and that you need to provide a 30 day notice prior to renewal which they do not even inform you that it is a renewal. They simply tell you a few days ahead of time that you need to upload a license key.
- Industry: Machinery
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
I no longer wanted my shop to run me....
E2 has been great to work with from the very beginning. We do not have an IT department but they helped walk me through the steps of setting up our system. They are always very nice and polite on the phone whenever I have to call. The system is great, with only a few bugs.
Pros
The way that E2 links all the different aspects together with various search functions. I can easily find ANYTHING i'm looking for and run so many reports to find out whatever information I want.
Cons
We still use the Access database version and it's only for PC. Two of us are dedicated Apple users, so that took some figuring out how to continue using Apple products with E2. There are only two reasons I haven't switched to the online hosted version - document type linking, and stable internet service.
- Industry: Electrical/Electronic Manufacturing
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
Best Software Value
Bottomline, the E2 Shop System is affordable, easy to use, expandable, versatile and worth the price we paid. The support is top notch and the sales process and our data transition was effortless. We purchased our software on February 23, 2005 and have been a customer for over 14 years!! The service and support has remained consistent over that time period and the company seems to be extremely customer focused. I would highly recommend the E2 Shop System.
Pros
What we like most about the E2 Shop System Software is the ability to expand and customize our databases. We purchased the SQL version which allowed us to put the E2 OEM program on steroids. We added custom fields and tables of things that were very specific to our manufacturing business. We also added a custom front end for our customers to access things like detailed part specifications, testing data, sales history, package tracking, and much more. We also added a custom backend for our employees to enter non E2 items into separate database tables and link the information to the customers and vendors already in E2. The best part is, we have a very high end custom solution at a fraction of the cost of some of the other solutions on the market. We have the ability to barcode scan, track employees time for payroll, calculate exact labor costs based on actual production times, track inventory, import our invoices into Quickbooks, perform accurate estimations / quotations and much more.
Cons
We started off with the Access database version which is limited in scope, but soon realized that the SQL version was much more powerful and allowed unlimited growth.
- Industry: Building Materials
- Company size: 51–200 Employees
- Used Daily for 2+ years
-
Review Source
The Perfect Manufacturing Software
We have been using E2 for well over 16 years and so far we love it. We have used other systems and this one just seed to get it right. In that time we have only had a handful of issues of which most were fixed in minutes and all we had to do was call Tech Support and explain what was not working. The customer and technical support staff are extremely knowledgeable in what their software can do and how they can customize it to fit your every need. They have even extra fields set aside for all most every function to carry different data types just in case you have found a data point that they haven't thought of.
Pros
E2 creates a clutter free work space with a simple layout and design. Shop Tech has broken down the manufacturing process to get a true understanding of how our company really operates. The bolt on modules allow for greater control of specific functions in particular departments. We specifically use the Scheduling and Custom Order Import Automation functions. Scheduling give us a top level view, department view, work center view, and all the way down to a view of sub parts that make up a single part. This tells us exactly where an order is as well as if we are under or over loaded at the work center and department level. All I have to do is pull up the schedule, click a button for the level of detail I want to display and away it goes. The Custom Order Import Function has allowed us to automate the order entry process by simply downloading a file from our customer, pointing where I saved the file, and clicking "Import". This function creates the order and based off our custom company settings which we have setup to automatically pull from stock jobs, inventory, post a quantity to make or a combination of all of the above. We can then run a requirement report to see what we need to make to fulfill open orders or to make stock for inventory. It really doesn't get easier than that.
Cons
The extra modules do have a cost but they are well worth it. On the plus side of that, E2 will demo the modules with full functionality and if it doesn't incorporate everything that you need you don't have to purchase it.
- Industry: Mining & Metals
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
Solid Product with good flexability
Our company has now used JobBOSS for around 4 years. We have found that the user interface is quite intuitive and straightforward to use. This is a plus when training new people on the system. Functionally, it has met most of the needs that we purchased it for.
We loved the idea behind the scheduling module, but have found it to not be a good fit with our shop. We are primarily a custom high mix, low volume shop. This leads to many jobs that have potential to run in more than one pathway on the floor and most jobs are first run where we do not have a history of expected production run times to fall back on. We also have split our shop floor into three self directed production cells that have a fair amount of cross work. The self direction means many production decisions are made at the cell level and not at a command level. Because of these factors, we found that matching our shop floor to the scheduling module was exceptionally difficult unless we were willing to dedicate a full time person to keeping it accurate. In the end, we believe that the scheduling module would work better in a higher volume production environment with more of a top down command structure than how we operate.
The reports that come with JobBOSS are reasonable, however, we have found that digging deeper into the data (at least the directions we looked) required special reporting. It is handy to have someone on staff who is comfortable working with SQL tables, data mining and creating custom reports. Exact does offer custom report creating. Just remember, it come at additional cost.
Pros
As someone who does look behind the scenes and works to dig data out of the system, I am impressed with the amount of information that JobBOSS does capture. Additionally, it is quite well organized in its structure. On the front end, the user interface is intuitive and lends itself to easy training.
Cons
Reporting. The stock reports are reasonable for a company that does not need to dig into its data very deeply. But the analysis at deeper levels would either require purchasing many custom reports or have someone on staff that can dig into the data and create custom reports.
The scheduling module works best in an environment with minimal chance of perturbation. Systems that have a high degree of variation become hard to model accurately.
- Industry: Mechanical or Industrial Engineering
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
E2 Shop System Review
See my answer under "Pros".
Pros
The software is very easy to learn and the interface is extremely easy to navigate. The modules provided exactly mirror the processes in our business so almost every part of the software is applicable to our day to day operations.
Having our business data archived, accessible and organized has sped up and simplified many of the tasks that used to take much longer. Estimates are now completed much faster and processes such as material receiving, shipping or the production of purchase orders for our vendors have become standardized and much easier to do. The time savings and insights into our business / production processes have made us more competitive and our customers (especially our larger industrial customers) see value in the advantages we've gained from the software.
Cons
The one part of the software that we find of little value is scheduling. This may not be the case for other users but as a job shop we've found that the scheduling module simply doesn't work with the realities of our production processes.
- Industry: Mining & Metals
- Company size: 51–200 Employees
- Used Daily for 2+ years
-
Review Source
If you are a company that is looking to truly maximize an ERP system to organize your company...
Pros
E2 user for 13 years, sequel version. Most manufacturing companies hardly utilize more than 50% of an MRP/ERP, and don't put the effort to truly comprehend the system to ever fully utilize. In those cases, this would be a good system to use. It does a lot of muscle work for you if you use it right. If you are truly ok with simply letting their scheduling module spit out a generic schedule that is limited in work-ability, this would be a good system. The most updated version has more bells a whistles which is nice but for us was fundamentally lacking in real change and not worthy of the investment to upgrade - plus the fact it is an entirely new system where you would lose all your history was additionally disappointing.
Cons
The system has way too many issues. The purchasing module is as stagnant and rigid as it gets. No room for flexibility. The estimating module is also disconnected on very basic levels from the purchasing side. The scheduling module has not been updated in any sort of substantial way since the beginning and is entirely too slow to be of use if you actually want to actively manage your variables. It crashes a lot (and yes, we had it set up by them so no reason there). The support is BASIC. Within 1 year, I was more knowledgeable than the staff trying to help me with questions I had. Constant system issues where quantities duplicate on their own, or system crashes when running a report (which some of them take a really long time).
- Industry: Utilities
- Company size: 51–200 Employees
- Used Daily for 2+ years
-
Review Source
Growing Our Business
Seventeen years ago I was brought into CAMCO to research and implement a comprehensive business and shop control solution for them. Other previous attempts to do so weren't working out and then we found Shoptech. I'm still here!
Shoptech has enabled us to control and track the hundreds of jobs and thousands of associated parts that flow through our business monthly. We can see where our time and materials are and have a precise breakout of costs and income. The accounting and reports module generate all that is needed for our accountants to do their respective tasks and give upper management the oversight they need to run the business.
Pros
We're a growing company and as such have turn-over and new personnel growth. E2 is intuitive and our new employees seem to be able to adapt into the system with minimal effort and training. As the IT person here I have witnessed that peer-to-peer training seems to be all that is required to have that new person up and running on E2 within a short time and with little involvement from me, that's a big help! From Shipping and Receiving through final Billing, if our new hire has basic computing skills, their transition into that respective E2 function hasn't been a major training concern.
Cons
We're a service and repair facility and it took considerable effort improvising and rethinking to adapt the system into our way of doing things. Initially the software seemed to be over-kill and confusing for our needs but with time we were able to merge our methods with the system and adapt.
- Industry: Machinery
- Company size: 51–200 Employees
- Used Daily for 2+ years
-
Review Source
Why E2 is the software choice for Taylor Manufacturing.
Overall E2 is great. Due to the job and cost tracking capabilities of E2, we are able to stay on top of our prices that we charge our customers. We can monitor the labor expense of our machines and setup times which allows us to find new processes to maintain our original quotes. These savings are passed on to our customers which benefits our company's growth and success rate.
Pros
The thing I like most about E2 is that it is so user friendly. The process of training new employees is very simple due to the ease of E2. E2 is very functional. It works wonderful for all our departments: AR, AP, Quoting & Estimating, Receiving & Shipping, order entry & purchasing, job tracking and all accounting and inventory reporting. The online forum, tutorials and customer service alone are reasons enough to purchase E2. Their customer services is top rated. I have always received help and been completely satisfied with the results each and every time I've contacted E2.
Cons
The thing I dislike about E2 is orphans. Orphans are little glitches that are caused when something goes wrong. E2 doesn't go backwards very well, meaning you have to be very cautious when undoing / unwinding things. Some of my fellow employees fail to unwind things the proper way so we get an orphan occasionally. Although I must say, orphans are an easy fix for E2 customer service reps.
-
Review Source
Forward Technologies is a small Job Shop in Springfield, OH. We specialize in machining plastics.
When I started at Forward Tech in 2007 we were using Peachtree software for our accounting system, Excel Spreadsheets for scheduling and quoting and a paper system for purchasing (NO PO’S).
In 2008 we started looking at software systems - my boss is always interested in improvements. That year we added another mill and lathe to the shop and our capacity had increased; handling everything was becoming more difficult. We looked at several systems but E2 just blew them all away. There was no doubt in anyone’s mind – we wanted this system.
Implementation was reasonably easy - we were starting from scratch so we were able to do things exactly the way we wanted. Of course we found out later it wasn’t exactly the way we wanted, but changes were easily made and with experience we are running very smoothly. With time and confidence we have utilized more aspects of the system. At first it was Order Entry-Purchasing- Accounting- then a real push to Time Tracking. We have not implemented scheduling but I see a time in the very near future when we will. Our use of the Quality Module is sporadic – but that is a manpower issue, not a software one.
I cannot say enough about Trisha, our in house rep. During implementation and the year afterward, she was always there to help and in fact still is. She answers emails instantly and I think she might even take some at home because I have received responses late in the evening. Since the addition of Tech View on the website, I can find the answers to some of my questions very quickly without bugging Trisha (I love the info sheets under “Knowledge”). One of the techs is always available; they get back to me quickly and help me fix whatever issue I might have.
How has E2 helped our shop? Since purchasing E2 we have doubled our capacity, hired more machinists, doubled our square footage and tripled our job load. Being able to easily track what is in-house, what is on order, order history, pricing, did we make money, did we lose money, the ability to play with pricing and have an idea of the profitability of the part, the ease of cross-referencing PO’s with invoices – all of these things have made my life so much easier.
As the shop has grown I have been able to keep up- and I think a lot of it is due to E2. I also think that E2 has given us confidence that we are actually making a profit – and with that confidence the knowledge that we can keep growing. We will be adding another Mill this fall.
Have there been difficulties? Of course, there always is with change – but I LOVE this system. If we have experienced resistance, well, that is a part of life. If I have to use a cattle prod on my fellas then I will use a cattle prod, because at the end of the day what I get from E2 is worth it.
-
Review Source
Qualastat Electronics, Inc. has been in business since 1986, specializing in the manufacturing of electronic cable and wire harness assemblies.
Included in our product line are RF assemblies, including phase-matched and time delay and fiber-optic cable assemblies. When the company reached the point where we could not adequately track inventory nor easily quote new assemblies, we decided to install an ERP system. We looked at a number of software packages that could be adapted to our organization but selected E2 due to its comprehensiveness, cost and ease of use. Prior to installing E2 we used a hodgepodge of programs including DBA, Databases and spreadsheets.
We quickly found that we could stop using everything but E2. Our quotes became more complete, which prevented us from leaving out tooling, NRE charges, minimum purchase costs and helped us instantly become repetitive with our quotes. We found that with the use of job costing, using barcoding the the manufacturing area, we could review closed jobs and make quick changes to our estimated labor before quoting the same or similar items in the future.
We now are able to analyze manufacturing processes by each individual operator and can determine what training needs to be done to improve efficiencies. The quality module made ISO-9001 certification much easier to obtain. Almost everything needed to become and stay compliant with ISO requirements are contained and provided inside the E2 program.
Our customer satisfaction and vendor quality are now easy to measure, which helps us to continually improve our business and product. We found that the savings we realized and the ability to see our true costs enabled us to see a two year payback and now everything is just more profit or savings to our customers.
We sent most of our staff and management personnel to get classroom training and have also had a local representative come into our facility for more specialized training and to provide refresher training. This has proven to be very effective and everyone was able immediately to run with the program.
Shoptech has proven to be a very supportive organization. Our employees enjoy the ability to call in and immediately resolve problems or issues they face. Nobody has had an instance where the customer support person could not help, which is uncommon in our industry.
There may be a better software package available for us to use. If it exists, I have not seen it and I would be very skeptical about any other software coming close to providing for us what E2 gives us on a continuous basis. I would highly recommend any job shop type organization to purchase the whole program and not leave out any modules since they all complement each other and make the whole program cost-effective and useful.
- Industry: Aviation & Aerospace
-
Review Source
9 Year User of E2 Shoptech
Pros
The product is a comprehensive job tracking system. When using the individual "modules" in the correct order in creating parts, quotes, jobs, purchases, shipments, etc. you will be able to trace, track, run reports and get great information. Shoptech as a vendor has always been extremely helpful when you contact them. You will not sit on hold for hours like with some other vendors. You will find both basic information and more extensive information on their website either through webinars, help papers, virtual training classes and also User Discussion Boards. Should you not find the information which you are seeking, their staff is very informative and will not leave you in a bind.
Cons
The vendor is very upfront about what their system will and will not accomplish. I miss my accounting bells and whistles with having real time reporting at my finger tips (however, they do provide a "Quick-view" area in which to get real time data for various areas in the system such as job status, parts/customer/vendor inquiries and information, PO status, etc. The worst issue that I can state is that in order to take a look at where items are hitting the G/L, the month in question has to be posted. In order to make any changes, the months have to be unposted. Users should not be in the "Accounting area" when this is being done. AND the worst part in using the audit trail to see which user possibly edited something, no matter where in the system, the audit trail will only tell you who viewed, possibly edited, but will not give you further information to solve your puzzles as to who did what, when and why.
- Industry: Aviation & Aerospace
-
Review Source
E2 is the ERP that gives the big name ERP's a Run for there money!!
Pros
I have used multiple ERP systems some of them rather expensive with a large learning curve, when I went looking for a ERP system for our machine shop, one of the leading criteria was that the ERP would have, or support the AS9100 standard. E2 was the only one that offered a QA module to help create our AS9100 documentation, then as a bonus E2 had a consultant come out and help set up our AS9100 Quality Management System, to top it off, another consultant came back out a few month later to do an audit of our documentation to make sure we were ready to take on the AS9100 registrar. E2 does have an AP & AR module however we wanted to be able to keep our financial information separate in QuickBooks, this ERP system allows you to flow order and purchase order information seamlessly from E2 to QuickBooks by syncing this information over. I really hope companies that are looking for an ERP system make E2 their choice. I did a lot of painstaking research on this and wish I would have found reviews of ERP systems like this to help me along. E2 does what it takes to run a business effectively and as an added surprise the software is cost effective as well.
Cons
The only Area I have had a challenge with would be the timeclock buzzer, the timeclock portion is provided by one of E2's partners and we recently had the buzzer stop working well, the e2 sofware is pinging the correct signal however the buzzer is not working correctly. So really this doesnt seem to be a E2 issue it is a computerwise issue (computerwise is the timeclock system)
- Industry: Medical Devices
- Company size: 11–50 Employees
- Used Daily for 2+ years
-
Review Source
E2 Team
E2 ShopTech has a great team to work with when your troubleshooting. If they can not find the answer they will make a copy of your database and find the answer and let you know the results. [SENSITIVE CONTENT HIDDEN] proved this to me on my last ticket sent in. Thank you for all your help troubleshooting the cost report vs the inventory stock amount.
Pros
Easy use for an ERP System. I enjoy all the help and support when I was leaning this software a few years ago. the transition from the old software to the new software was very easy. Your team is very helpful when teaching others how to use the software. The classes are a huge help. Thank you.
Cons
I could see improvement in offering the old live classes in the old E2 software. My old job, I used the old software then transitioned my team to the new we based software. Now, I am back using the old software until I move them to the web based software, and the classes are only in the new web based software, so it is difficult to teach a new team how to use this software when the video's only show the new web based version.
- Industry: Mining & Metals
-
Review Source
Small Business Looking for Shop Control
Pros
Experience: We are a small family owned business that needed to get ISO certified as a requirement by our customer. We did our research and E2 was the best company to offer shop control and offer ISO certification. We have been using E2 since 2012, we have been ISO certified since 2012. We were eager and became ISO certified within 6 months (take a lot of work and dedication to get it done quickly).
Overall E2 has been a great resource for us.
Pros: The software is easy to use, the information that you are able to get from reports is helpful (only as good as the information put in).
Easy for all employees to use with all computer skill levels.
ISO documentation was extremely helpful with becoming ISO certified.
Customer service is always helpful, you always get a real person to help you with your needs.
Cons
Software does not allow you to do multiple things at once, it is very simplistic which might be best.
Difficult to customize it to you specific needs, it can be done but there is a cost for that. If you are a start up company this software would be great to get you going with all aspects, if you are an established company you might need to adjust how you do things.
We still do all of our accounting and customer quoting from QuickBooks as that works best for our company.
We do not use E2 for scheduling as we are a fast pace job shop and things change on the fly and difficult to schedule within the software.
